-
Z51 Predator 660mm Wingspan 2.4G 2CH EPP DIY Glider RC Airplane RTF Built-in Gyro
$139.00
$89.97 -
RQ-7 SHADOW 2100mm (83in) Pre-Built Balsa ARF RC Plane
$999.00
$499.92 -
Hawker Hurricane 750mm/30'' EPO Electric RC Airplane PNP Camo
$189.00
$89.99 -
Flycat 70mm 12-Blade 1042mm (41") Wingspan EDF RC Jet Plane PNP
$399.00
$257.92 -
Dynam T-28 Trojan 1270mm EPO RC Plane With Retracts Ready-To-Fly
$399.00
$319.97 -
P-51 P51 P-51D Mustang 2.4G 4CH Electric R/C RC Airplane Plane 100% Ready To Fly
$259.92 -
F/A-18 Hornet 64mm EDF Electric R/C RC Jet Airplane RTF Silver
$386.96
$239.92 -
VolanterRC FPVraptor V2 Tower UAV Trim Scheme 2M Unibody Pusher (757-V2) Eelctric RC Glider Kit Version
$159.00
$109.97 -
S.E.5A SE5a 1.62M(63.8")Balsa Wood Pre-Built ARF RC Airplane
$529.00
$311.92 -
Large 1200mm Dynam P-51D Mustang Ready-To-Fly Electric RC Airplane
$399.00
$319.97
Product Description
Condition: The only issue with this item is the out box slightly damaged. The plane is intact and in factory fresh conditon.
Features:
High-wing aircraft with very smooth slow flight characteristics and amazing 3D aerobatic performance.
Large air-filled and shock-absorbing tires make short take-offs and landings possible on almost any surface.
Equipped with 6S LiPo compatible brushless motor and an 80A Hobbywing controller (with EC5 connector) and a 15×7” wooden propeller. Excellent climb performance and a very good top speed.
2:1 and large control surfaces on the wings, elevator and rudder make the model a 3D aerobatic trainer with excellent slow flight and STOL properties (short take-off and landing).
The wings utilise a thick aerofoil with very large flaps and ailerons (approx. 40% of the total area).
Highly visible SIBA design
The flaps can be switched to a control surface via the transmitter and are suitable for extreme 3D manoeuvres
Ailerons and landing flaps can be mixed: Ensures extreme maneuverability in flight
Complete night flight lighting in the fuselage and in the wings, switchable via the transmitter
Various access hatches to all components on the fuselage and a large battery compartment for 6S LiPo batteries from 3000-4200mAh
2-piece wing with fibreglass tube wing joiner
5015 brushless motor 550KV
The ESC controller (Hobbywing 80A / 5V 8A UBEC) ensures good response in every situation and the precise
Digital servos with metal gears for optimal steering control.
Specifications:
Wingspan: 1830mm (72")
Length: 1330mm (51.2")
Wing loading: 68.5g/dm²
Wing area: 43.2dm²
Weight: approx. 6 lbs (2685g) ready to fly (depending on battery size)
Main material: EPO foam, high-strength
Thrust: over approx. 2:1
Motor: 5015 / 550kv
ESC Controller: 80A Hobbywing, 5V / 8A UBEC, XT90 plug
Propeller: 15 x 7 / 2-blade wooden
Servos: 2x 25g digital, 4x 19g digital
Construction time: approx. 30min
Required accessories (not included):
Transmitter and receiver at least six channels (recommended: at least 6-channel computer transmitter)
LiPo battery 3000 – 5200mAh 6S with XT90 connector
Charger for drive battery
Features:
High-wing aircraft with very smooth slow flight characteristics and amazing 3D aerobatic performance.
Large air-filled and shock-absorbing tires make short take-offs and landings possible on almost any surface.
Equipped with 6S LiPo compatible brushless motor and an 80A Hobbywing controller (with EC5 connector) and a 15×7” wooden propeller. Excellent climb performance and a very good top speed.
2:1 and large control surfaces on the wings, elevator and rudder make the model a 3D aerobatic trainer with excellent slow flight and STOL properties (short take-off and landing).
The wings utilise a thick aerofoil with very large flaps and ailerons (approx. 40% of the total area).
Highly visible SIBA design
The flaps can be switched to a control surface via the transmitter and are suitable for extreme 3D manoeuvres
Ailerons and landing flaps can be mixed: Ensures extreme maneuverability in flight
Complete night flight lighting in the fuselage and in the wings, switchable via the transmitter
Various access hatches to all components on the fuselage and a large battery compartment for 6S LiPo batteries from 3000-4200mAh
2-piece wing with fibreglass tube wing joiner
5015 brushless motor 550KV
The ESC controller (Hobbywing 80A / 5V 8A UBEC) ensures good response in every situation and the precise
Digital servos with metal gears for optimal steering control.
Specifications:
Wingspan: 1830mm (72")
Length: 1330mm (51.2")
Wing loading: 68.5g/dm²
Wing area: 43.2dm²
Weight: approx. 6 lbs (2685g) ready to fly (depending on battery size)
Main material: EPO foam, high-strength
Thrust: over approx. 2:1
Motor: 5015 / 550kv
ESC Controller: 80A Hobbywing, 5V / 8A UBEC, XT90 plug
Propeller: 15 x 7 / 2-blade wooden
Servos: 2x 25g digital, 4x 19g digital
Construction time: approx. 30min
Required accessories (not included):
Transmitter and receiver at least six channels (recommended: at least 6-channel computer transmitter)
LiPo battery 3000 – 5200mAh 6S with XT90 connector
Charger for drive battery