-
Husky Ultimate 6S PNP 1800mm STOL Bush RC Plane
$599.00
$329.92 -
Toprc P-51D Mustang Yellow 750mm/30.00in EPO Electric RC Airplane Ready-To-Fly
$289.00
$219.99 -
LX L-20 1280mm Wingspan Electric RC Plane
$288.00
$136.97 -
F-18 Twin 40mm EDF Jet F18 Hornet RC Plane Model PNP
$265.00
$169.92 -
Dynam WACO (YNF-5D) 1270mm 4ch EPO RC Electric Plane Ready-To-Fly
$399.00
$319.97 -
VolantexRC Tumbler Auto-roll-back Pool Racer RC Boat (796-1) Ready-To-Run
$139.00
$59.97 -
Dynam Seawind 1220mm (48") Wingspan Electric RC Plane Ready-To-Fly
$399.00
$319.97 -
Valkyrie 90mm EDF RC Jet Kit Version with Retracts and Servos Installed
$399.00
$272.92 -
Dynam PT-17 1300mm Wingspan EPO RC Plane PNP Blue
$329.00
$208.99 -
TopRC F-18 Blue Angel 686mm Wingspan RC Jet Ready-To-Fly
$399.00
$289.99
Product Description
Features:
High-wing aircraft with very smooth slow flight characteristics and amazing 3D aerobatic performance.
Large air-filled and shock-absorbing tires make short take-offs and landings possible on almost any surface.
Equipped with 6S LiPo compatible brushless motor and an 80A Hobbywing controller (with EC5 connector) and a 15×7” wooden propeller. Excellent climb performance and a very good top speed.
2:1 and large control surfaces on the wings, elevator and rudder make the model a 3D aerobatic trainer with excellent slow flight and STOL properties (short take-off and landing).
The wings utilise a thick aerofoil with very large flaps and ailerons (approx. 40% of the total area).
Highly visible SIBA design
The flaps can be switched to a control surface via the transmitter and are suitable for extreme 3D manoeuvres
Ailerons and landing flaps can be mixed: Ensures extreme maneuverability in flight
Complete night flight lighting in the fuselage and in the wings, switchable via the transmitter
Various access hatches to all components on the fuselage and a large battery compartment for 6S LiPo batteries from 3000-4200mAh
2-piece wing with fibreglass tube wing joiner
5015 brushless motor 550KV
The ESC controller (Hobbywing 80A / 5V 8A UBEC) ensures good response in every situation and the precise
Digital servos with metal gears for optimal steering control.
Specifications:
Wingspan: 1830mm (72")
Length: 1330mm (51.2")
Wing loading: 68.5g/dm²
Wing area: 43.2dm²
Weight: approx. 6 lbs (2685g) ready to fly (depending on battery size)
Main material: EPO foam, high-strength
Thrust: over approx. 2:1
Motor: 5015 / 550kv
ESC Controller: 80A Hobbywing, 5V / 8A UBEC, XT90 plug
Propeller: 15 x 7 / 2-blade wooden
Servos: 2x 25g digital, 4x 19g digital
Construction time: approx. 30min
Required accessories (not included):
Transmitter and receiver at least six channels (recommended: at least 6-channel computer transmitter)
LiPo battery 3000 – 5200mAh 6S with XT90 connector
Charger for drive battery
High-wing aircraft with very smooth slow flight characteristics and amazing 3D aerobatic performance.
Large air-filled and shock-absorbing tires make short take-offs and landings possible on almost any surface.
Equipped with 6S LiPo compatible brushless motor and an 80A Hobbywing controller (with EC5 connector) and a 15×7” wooden propeller. Excellent climb performance and a very good top speed.
2:1 and large control surfaces on the wings, elevator and rudder make the model a 3D aerobatic trainer with excellent slow flight and STOL properties (short take-off and landing).
The wings utilise a thick aerofoil with very large flaps and ailerons (approx. 40% of the total area).
Highly visible SIBA design
The flaps can be switched to a control surface via the transmitter and are suitable for extreme 3D manoeuvres
Ailerons and landing flaps can be mixed: Ensures extreme maneuverability in flight
Complete night flight lighting in the fuselage and in the wings, switchable via the transmitter
Various access hatches to all components on the fuselage and a large battery compartment for 6S LiPo batteries from 3000-4200mAh
2-piece wing with fibreglass tube wing joiner
5015 brushless motor 550KV
The ESC controller (Hobbywing 80A / 5V 8A UBEC) ensures good response in every situation and the precise
Digital servos with metal gears for optimal steering control.
Specifications:
Wingspan: 1830mm (72")
Length: 1330mm (51.2")
Wing loading: 68.5g/dm²
Wing area: 43.2dm²
Weight: approx. 6 lbs (2685g) ready to fly (depending on battery size)
Main material: EPO foam, high-strength
Thrust: over approx. 2:1
Motor: 5015 / 550kv
ESC Controller: 80A Hobbywing, 5V / 8A UBEC, XT90 plug
Propeller: 15 x 7 / 2-blade wooden
Servos: 2x 25g digital, 4x 19g digital
Construction time: approx. 30min
Required accessories (not included):
Transmitter and receiver at least six channels (recommended: at least 6-channel computer transmitter)
LiPo battery 3000 – 5200mAh 6S with XT90 connector
Charger for drive battery