-
Flyfly Beechcraft Beech Duke B60 1600mm/63'' Electric RC Plane Kit
$455.00
$269.97 -
Dynam Primo 1450mm Wingspan RC Airplane PNP
$329.00
$195.97 -
DW Hobby 39.4" Airplane Deperdussin Monocoque 1.0M Balsa Wood RC Plane Model Kit
$290.00
$152.97 -
Dynam Cessna 182 50'' Electric RC Plane Ready-To-Fly
$399.00
$319.97 -
Dynam F6F Hellcat V2 50'' 1270mm EPO Electric RC Airplane Ready-ToFly
$459.00
$319.97 -
VolanterRC FPVraptor V2 Tower UAV Trim Scheme 2M Unibody Pusher (757-V2) Eelctric RC Glider Kit Version
$159.00
$109.97 -
AF-Models Viper 64mm EDF RC Jet PNP Etihad
$305.00
$188.99 -
PBY Catalina 2.4G Brushless/LIPO Electric RC Airplane PNP Blue
$359.00 -
Unique Models Extra 300 1200mm Wingspan 3D RC Plane PNP Y
$399.00
$239.97 -
Volantex P-51D Mustang 400mm Wingspan 2.4G 6-Axis Gyro RC Airplane One Key Return Ready-To-Fly
$150.00
$68.99
Product Description
Dynam RC has recreated the Hawker Tempest in a beautiful EPO foam
construction. The wingspan stretches 50 inches while the fuselage stretches 40
inches. The Tempest is equipped with Dynam's 600kv brushless outrunner motor and
a 40amp brushless electronic speed controller providing great power to weight
ratio. The control surfaces come alive through the operation of pre-installed 9
gram servos for the aileron, rudder, and elevator. The Tempest is also equipped
with retractable servo less landing gear.
This almost ready to fly version comes out of the box with all the electronics installed. You will need a minimum 5 channel radio system and a 14.8v 2200mah battery to power and control the electronics. Minimum assembly is also required to get the plane ready for flight.
Please note: The Dynam retracts are not compatible with the Airtronics FHSS-1 radio system, they will work with their new FHSS-2 and FHSS-3 radio system.
Specifications:
Wingspan: 1250mm (49.2in)
Overall Length: 1018mm (40in)
Wing Loading: 49.5g/d㎡
Servo: 9gx4pcs
Speed Controller: 40A Brushless
Motor Size: BM3720A-KV600 Brushless Outrunner
Battery: 14.8V 2200mAh Li-Po, 25C
5 channel Minimum Radio System
Lipo Charger capable of 4 cell charging
AA batteries for transmitter
This almost ready to fly version comes out of the box with all the electronics installed. You will need a minimum 5 channel radio system and a 14.8v 2200mah battery to power and control the electronics. Minimum assembly is also required to get the plane ready for flight.
Please note: The Dynam retracts are not compatible with the Airtronics FHSS-1 radio system, they will work with their new FHSS-2 and FHSS-3 radio system.
Specifications:
Wingspan: 1250mm (49.2in)
Overall Length: 1018mm (40in)
Wing Loading: 49.5g/d㎡
Servo: 9gx4pcs
Speed Controller: 40A Brushless
Motor Size: BM3720A-KV600 Brushless Outrunner
Battery: 14.8V 2200mAh Li-Po, 25C
5 channel Minimum Radio System
Lipo Charger capable of 4 cell charging
AA batteries for transmitter