-
Dynam Turbo Jet Twin 64mm EDF Jet 1180mm (46") Wingspan with Electronic Retracts and Flaps Ready-To-Fly
$429.00
$299.97 -
F-16 Fighting Falcon 64mm EDF Electric RC Jet Fighter Airplane Ready-To-Fly
$369.00
$199.97 -
Dassault Rafale EDF Electric Rc Jet
$329.97 -
Dynam F4U Corsair V2 50'' EPO Electric RC Airplane Warbird
$319.00
$202.99 -
VolantexRC Tumbler Auto-roll-back Pool Racer RC Boat (796-1) Ready-To-Run
$139.00
$49.97 -
Skyline Edge 540 30CC 70''/1778mm Aerobatic RC Airplane
$650.00
$398.97 -
Dynam Waco Red 1270mm 50inch Wingspan RC Airplane PNP
$309.00
$227.99 -
Dynam A-10 Thunderbolt II V2 Twin 64mm EDF RC Jet with Retracts 1080mm Wingspan Ready-To-Fly
$429.00
$319.97 -
Volantex P-51D Mustang 400mm Wingspan 2.4G 6-Axis Gyro RC Airplane One Key Return Ready-To-Fly
$150.00
$68.99 -
TopRC F-18 Blue Angel 686mm Wingspan RC Jet Ready-To-Fly
$399.00
$289.99
Product Description
Features:
Fuselage with preinstalled servos, Y-harness, pushrods, motor and ESC
Wing halves with preinstalled servos, pushrods and ailerons
Preassembled landing gear
Fiberglass wing tube
Horizontal stabilizer with preinstalled carbon fiber reinforcement
Vertical stabilizer with preinstalled tailwheel
Spare propeller
Fully decorated pilot figure and adhesive
Full hardware package with phillips screwdriver, metric allen wrench and contact cement
Pressure sensitive decals
Specifications:
Wingspan: 50in(1270mm)
Overall Length: 45.8in(980mm)
Wing Loading: 42.2g/sq dm
Flying Weight: 2.8lb(1250g)
Already Installed:
Motor: BM3715A-KV900 Brushless Outrunner
Speed Controller: 40A Brushless with T connector
Servo: 9g x 4
Still Required:
Your own transmitter and receiver.
3S 2200mAh LiPO
Fuselage with preinstalled servos, Y-harness, pushrods, motor and ESC
Wing halves with preinstalled servos, pushrods and ailerons
Preassembled landing gear
Fiberglass wing tube
Horizontal stabilizer with preinstalled carbon fiber reinforcement
Vertical stabilizer with preinstalled tailwheel
Spare propeller
Fully decorated pilot figure and adhesive
Full hardware package with phillips screwdriver, metric allen wrench and contact cement
Pressure sensitive decals
Specifications:
Wingspan: 50in(1270mm)
Overall Length: 45.8in(980mm)
Wing Loading: 42.2g/sq dm
Flying Weight: 2.8lb(1250g)
Already Installed:
Motor: BM3715A-KV900 Brushless Outrunner
Speed Controller: 40A Brushless with T connector
Servo: 9g x 4
Still Required:
Your own transmitter and receiver.
3S 2200mAh LiPO